Home
About MMI
Products
Product Categories
Holiday Special
New Products
Commission Package
Replacement Parts
Boat Maintenance
Clearance
Shopping Cart
 
My Account
Customer Care
Manufacturers
Consulting Center
Categories » All » Marine Paint & Supplies » Marine Varnish » BRISTOL VARNISH QUART KIT..
BRISTOL VARNISH QUART KIT HIGH PERFORMANCE EXTERIOR AND INTERIOR USE
ITEM# : BRIB-8005
Product Name : BRISTOL VARNISH QUART KIT HIGH PERFORMANCE EXTERIOR AND INTERIOR USE
Category : Marine Paint & Supplies » Marine Varnish
Weight : 4 lbs
Now Only : $71.08 USD / QOT
Quantity :
0 QOT in your cart.
Temporarily out of stock.
Available within 7-10 business days if the item is in stock.

Product Application Exterior

Bristol Finish Traditional Amber Urethane requires the same basic prep as ordinary varnish, but the application is both easier and faster. Save almost 75% of the labor compared with ordinary varnish!

Preparation Procedures

New or Bare Wood: Sand up to 220 grit. Remove dust and wipe with acetone.

Previously Varnished Surfaces: New coatings should be allowed to cure fully before over-coating with Traditional Amber Urethane. Check compatibility on a small area before coating large areas.

Sand with 220 grit until smooth and dull. Use a ScotchBrite pad for sharp corners and edges. Remove dust and wipe with acetone.

 

 

Application Procedures

Measuring and Mixing: Mix together 8 parts by volume Urethane Base to 1 part by volume Catalyst. Stir thoroughly.

Thinning: The viscosity should be suitable for use as supplied. If desired, thin with acetone or MEK, 1 part by volume or less. In extremely hot weather (90�F/32�C) use our Tropical Reducer to slow the dry time.

Application: 4 coats are required for minimum UV resistance and durability. 6 coats are recommended for optimum performance. More coats may be required to completely fill the wood grain for porous wood types. More coats (up to 8) will be required for severe tropical exposure. More coats may be applied for a deep wet look finish.

There are three methods to choose from for application:

Wet-on-Wet Method: Apply the first coat and allow to dry to a firm tack (approximately 1 to 2 hours). Apply the second or next coat without sanding. Continue until all coats are applied.

Re-coat without sanding at any time up to 24 hours after the last coat.

Fast Method: Apply all but the last coat using the Wet-on-Wet Method described. Don't stop because of runs, drips or small amounts of dust. Allow to cure and sand with 220 grit until smooth and dull. Use a ScotchBrite pad for sharp corners and edges. Remove dust with acetone, then lightly wipe with a tack rag. Apply the final coat.

This method gives a fast build-up and the chance to remove any defects with a minimum of labor.

Dry Method: Apply a coat, allow to dry completely, sand and repeat until all coats are applied.

Roller application: Quickly wet out a 2' x 2' or so area, and tip once with a slightly wet brush. If a satin or non-gloss finish is required, apply a final coat mixed with our Satin


 

Related Product (1/2)
NO PIC
Only $135.00 US
NO PIC
Only $47.41 US
NO PIC
Only $59.30 US
NO PIC
Only $69.68 US
Only $77.45 US
»

MMI Marine is your best source when you need replacement parts for Taiwan boats and other yacht replacement parts. Our vast selection of discount marine parts and accessories will help you rest assured that you are getting the finest quality parts at the best available pricing.

Our inventory includes more than 200,000 items, such as hardware, equipment, electrical components, safety gear, appliances, lighting, and more. We work with top brand manufacturers to make sure you are choosing from the very best in replacement parts for Taiwan boats, and shipments can be made from either our domestic division or our Taiwan-based operations.

Your yacht is your symbol of success and we understand that you only want the best when it comes to updating your systems or completing basic repairs. You can turn to us for everything from detailing chemicals to pumps, and even complete commission packages. Let us be your trusted one stop source for all the yacht replacement parts you need.

M.M.I.
894 W. 16th St.
NEWPORT BEACH, CA.92663, USA
TOLL FREE: 1-800-7473014
TEL: (949)631-0518
FAX: (949)631-0313
Email: info@mmimarine.com
Product offering and prices listed on this website (www.mmimarine.com) are limited to Internet orders and prices subject to change without notice.
We accept paypal, credit cards & wire transfer.
Acceptance Mark
| NEWS | CONTACT US | PRODUCTS | WARRANTY | PRIVACY POLICY |
© 2006-2024 MAGNA MARINE INC(DBA M.M.I.) All Rights Reserved